《NFPA 701-2004 紡織品及薄膜的防火試驗》由會員分享，可在線閱讀，更多相關《NFPA 701-2004 紡織品及薄膜的防火試驗（24頁珍藏版）》請在技術文庫上搜索。
1、-U-Units of measurement . 1.3-W-Water leaching, accelerated . 16.5, 17.570118 FIRE TESTS FOR FLAME PROPAGATION OF TEXIndexAssociation.in thereproducedMass loss, specimen . 9.1, 10.1.1.2 to 10.1.1.4Material description . 17.2Measurement, unitAnnex D Textile ConsiderationsThis annex is not a part of t。
2、he requirements of this NFPAdocumentbut is included for informational purposes only.D.3.4 Relatively temporary treatments are suitable only wmuch lower percentage of moisture because the specimenwould have been conditioned to very close to bone dry. How-resist the flame for 2 to 3 minutes and then t。
3、o ignite and burnintensely. Because NFPA A suitable burner is available as Catalog No. 03-902 fromFisher Scientific Company, www.fishersci.com.B.3 Test Method 2. The Test Method 2 procedure should beused for assessing the response of heavy f16.4 Accelerated Laundering. 17.3 Conditioning. The conditi。
4、oning of the specimens shallbe described.70113ANNEX A16.4.1 When the material to be tested is intended to be refur-bished by laundering, the14.1.1.5 The flat specimens shall be suspended vertically inthe stack with their full width facing the front of the stack so15.1.2 When the length of char of an。
5、y individual folded speci-men exceeds 1070111FLAME TEST PROCEDURES FOR TEST METHOD 213.1.6 For multilayer assemblies (either flat or folded), thelayers shall be sewn together as shown in Figure 13.1.6 using aplain stitch with 2.5 stitches/12.4.2 If the burner is equipped with a gas flow controllingv。
6、alve, the valve shall be open fully in order to prevent restric-12.5 Timer. A stopwatch or other timing device that measures toan accuracy 12.2.1.1 The stack shall be supported 305 mm5mm(12.0 in. 0.2 in.) above the floor by legs and shall be open at12.2.1.3 A glass fiber fabric baffle shall be insta。
7、lled in theupper portion of the test8.3.10 Observations such as, but not limited to, the type,amount, color, density, and odor of smoke produced, the vig-10.1.2 When a sample does not demonstrate passing perfor-mance in accordance with 8.1.1.3 The specimen shall be placed on the pin bar so thatthe s。
8、urface or the layer intended to face the wall or window7017TEST PROCEDURE FOR TEST METHOD 17.1.4.2 The layers of the multilayer assembl5.5* Mounting Jig. A mounting jig shall be used for mountingspecimens to the pin bar in a uniform and safe manner.TOP MOVABLE SECTION7016 FIRE TESTS FOR FLAME PROPAG。
9、ATION OF TEXTILES AND FILMS5.4.2* 2.3 Other Publications.Chapter 5 Test Apparatus and Materialsfor Test Method 17015TEST APPARATUS AND MATERIALS FOR TEST METHOD 12.3.1 AATCC Publication. American Association of TextileChemists and CoNFPA 701plastic blinds, with or without reinforcement or backing, w。
10、ithareal densities greater than 700 g/m2(21 oz/yd2).7014 FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMSStandard Methods ofFiContents10.1 Performance Criteria . 7018 Index . 701177013CONTENTSChapter 1 Administration .Technical Committee on Fire TestsPatty K. AdairDC MJesse J. Beitel,April L. 。
11、Berkol,Inc., NY URep. AmericanRobert G. Bill,Rep. FMJohn A. BlairRep. SocietyGordon H. Damant,CorporationThomas W. FritzFilmsAssociationthesedestheamendedTpreviouseditions.afortocurrentdictorMatchRecommendedterminologiescationdesignatedthecompliancerangingTtionno7011Copyright 2004, National Fire Pro。
12、tection AssociatiADDITIONAL NOTICES AND DISCLAIMERSUpdating of NFPA DocumentsUsers of NFPA codes, standards, recommended practices, and guides should be aware thatthese documents may be superseded at any time by the iIMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTSNOTICE AND DISCLAIMER OF。
13、 LIABILITY CONCERNING THE USE OF NFPA DOCUMENTSNFPA codes, standards, recommended practices, and guides, of which theNFPA 701 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films 2004 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization 。
